Please see link below for your basic steps
Products used in this How-to:
Materials List:
1. Mold box that can be reassembled
-
Alumilite High Strength 2 Silicone Rubber
-
Alumilite Flex 80 Casting Resin
-
Plastic Cup with a small funnel attached to the bottom
-
Large Syringe
-
Pressure Pot
-
Vacuum Degassing Equipment
https://www.alumilite.com/PDFs/Printables/How%20to%20cast%20resins/CV-Boots-new.pdf
Comments
0 comments
Article is closed for comments.