Alumilite's Amazing Clear Cast is a clear casting and coating system that cures to a rigid, durable, clear plastic. Use Amazing Clear Cast for coating or finishing applications such as bar tops, floors, taxidermy scenery, lenses, and all sorts of other clear casting or coating applications.
- Easy to use, 1:1 mix ratio system that cures in 24 hours.
- It can be colored with Alumilite dyes, alcoholic inks, or other non-water base colorants.
- Complies with FDA 21 CFR 175.300
NOTE: Epoxies in their unmixed state will naturally yellow with time and are NOT recommended over white or any background in which the material's change in color will affect the appearance of the item. It is recommended for high gloss coating over colors or surfaces whereas yellowing of epoxy will not be noticed or an issue. Yellowing of the hardener can occur in as soon as 30-60 days. Yellowing does not affect the ultimate cure of the product when properly measured, thoroughly mixed, and fully cured.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Prior to use, read all Technical Data Sheets/Instructions and Safety Data Sheets linked below.
|Product||Amazing Clear Cast|
|Mix Ratio||1:1 by **VOLUME**|
|Pot Life||30-40 mins|
|Demold Time(100 gr Mass)||24-48 hrs|
|Mixed Viscosity (cps.)||2600|
|Shore Hardness (ASTM D-2240)||80 D|
|Tensile Strength (ASTM D-638)(psi)||8,000|
|Temp Resistance||Not recommended beyond 130F|