Please see link below for your basic steps
Products used in this How-to:
* Petroleum Jelly
* UMR Mold Release
* Alumilite Shell Casting Resin
* Alumilite High Strength 2 Silicone Rubber * Thixotropic Additive for silicone
* Excel Soft Handle Knife
* Stir Sticks
* Mixing Cups
* Paint Brush
* Cut up pieces from an old or marbles
* 2- 8" pieces of 2x4
https://www.alumilite.com/PDFs/Printables/How%20to%20make%20molds/Shell-Brush-On-Mold-min.pdf
Comments
0 comments
Article is closed for comments.