Please see link below for your basic steps
Products used in this How-to:
* Alumilite Plat 55 Silicone Rubber
* Alumilite Synthetic Modeling Clay
* Alumilite Corrugated Plastic Strips
* Hot Melt Glue
* Plastic or wood base
* Putty Knife or Alumilite Spatula Tool Set * Excel Knife
* Screws or Nuts & Bolts
* Rubber to Rubber Mold Release
* Stir Stick
* Mixing container
* Vacuum Chamber (if available)
Comments
0 comments
Article is closed for comments.