Please see link below for your basic steps
Products used in this How-to:
* Original Tail Light Lens
* High Strength 2 Silicone Rubber * Alumilite Regular
* Dye (Blue used here)
* Rubber to Rubber Mold Release * Glue Gun
* Sculpting Tool
* Excel Knife / Putty Knife
* Corrugated Plastic
* Popsicle Stick
* Cups
https://www.alumilite.com/PDFs/Printables/How%20to%20make%20molds/Squish-Mold.pdf
Comments
0 comments
Article is closed for comments.